The WLconnectivity K Series DHG is a cable-mounted free receptacle designed for inline cable-to-cable connections. Unlike a fixed panel receptacle, it installs directly on the cable and requires no panel cutout or panel-mounting nut.
The rear cable-retention system incorporates a cable collet and a back nut designed to accept a compatible bend-relief boot. The supplied images do not show the flexible boot itself, so the product should be described as having a “nut for fitting a bend relief” unless the boot’s inclusion is confirmed.
The push-pull self-latching interface provides fast mating and secure retention without threaded coupling. Multiple keying options help prevent cross-mating between circuits. DHG free receptacles are available in 0K, 1K and 2K shell sizes.
Available Models
DHG.0K、DHG.1K、DHG.2K
These are base shell designations. The complete ordering code must also specify the contact insert, termination, cable-collet size, supported cable outside diameter and bend-relief configuration.
Typical Applications
Instrumentation、Medical equipment、Video-processing equipment、Industrial control systems
| Mechanical endurance | More than 5,000 mating cycles |
| Maximum relative humidity | 95% RH at 60°C |
| Operating temperature | -45°C to +125°C |
| Vibration | 10-2,000 Hz, 15 g |
| Mechanical shock | s |
| Salt-spray resistance | More than 72 hours |
| Ingress protection | IP65-IP68, depending on configuration and correct cable assembly and mating |
Product Dimensions
Keying
The K Series connector shell designation consists of three letters. The final letter identifies the keying configuration.
Example: DHG.1K
- DH: cable-mount free-receptacle body style with cable collet and bend-relief-compatible back nut
- G: standard G keying
- 1K: K Series, shell size 1